Now many enterprises are producing solid potassium hydroxide products, which are widely used. As a chemical product, its use has been favored by many fields. Due to the high use requirements, we have strict requirements on product quality, so in order to ensure the product quality as much as possible, we can only improve the product quality from the production side. Let's learn how to improve the product quality.

　　1. 濃縮制片狀堿加熱過程中一般需要使用熔鹽作為介質，而熔鹽則需要使用氫燃燒爐來獲得熱源。燃燒爐生產的熱量必須處于穩定狀態,確保熔鹽溫度和流是相對平衡的,只有在一個相對穩定的狀態可以加熱到固體氫氧化鉀,通常在堿液的集中器后溫度需要達到380 - 400℃范圍內。

　　1. Molten salt is generally used as the medium in the process of concentrated flake alkali heating, while molten salt needs to use hydrogen combustion furnace to obtain heat source. The heat produced by the combustion furnace must be in a stable state to ensure that the molten salt temperature and flow are relatively balanced. Only in a relatively stable state can it be heated to the solid potassium hydroxide. Generally, the temperature after the concentrator of the alkali liquor needs to be within the range of 380 - 400 ℃.

　　2. 加熱時應控制好高壓蒸汽的壓力和溫度。一般來說，溫度范圍在190-210℃比較合適。

　　2. The pressure and temperature of high-pressure steam shall be controlled during heating. Generally speaking, the temperature range is 190-210 ℃.

　　3.加熱過程中，設備應保持密封狀態。高壓加熱時，避免與空氣接觸。

　　3. During the heating process, the equipment shall be sealed. Avoid contact with air when heating under high pressure.

　　以上是關于在生產過程中提高固體氫氧化鉀質量的方法，在生產過程中，很多廠家都有自己的優勢，所以我們應該努力提高產品的質量。只有產品的質量好，產品的使用才會更好，同時我們的產品也更受歡迎，所以提高產品的質量是非常重要的。

　　The above is about how to improve the quality of solid potassium hydroxide in the production process. In the production process, many manufacturers have their own advantages, so we should strive to improve the quality of products. Only the quality of products is good, the use of products will be better, and our products are more popular, so it is very important to improve the quality of products.